Tools Home Improvement , Power Hand Tools , Power Tool Parts Accessories,with,Chuck,K11,Wr,Lathe,Self-Centering,3-Jaw,Set,,Chuck,/health/digestive-health/crohns-disease/,80,Chuck,widefide.com,$53 $53 3-Jaw Self-Centering Chuck Set, K11 80 Lathe Chuck with Chuck Wr Tools Home Improvement Power Hand Tools Power Tool Parts Accessories 3-Jaw Self-Centering Manufacturer regenerated product Chuck Set K11 with 80 Lathe Wr $53 3-Jaw Self-Centering Chuck Set, K11 80 Lathe Chuck with Chuck Wr Tools Home Improvement Power Hand Tools Power Tool Parts Accessories Tools Home Improvement , Power Hand Tools , Power Tool Parts Accessories,with,Chuck,K11,Wr,Lathe,Self-Centering,3-Jaw,Set,,Chuck,/health/digestive-health/crohns-disease/,80,Chuck,widefide.com,$53 3-Jaw Self-Centering Manufacturer regenerated product Chuck Set K11 with 80 Lathe Wr

3-Jaw Self-Centering Manufacturer regenerated product Max 64% OFF Chuck Set K11 with 80 Lathe Wr

3-Jaw Self-Centering Chuck Set, K11 80 Lathe Chuck with Chuck Wr

$53

3-Jaw Self-Centering Chuck Set, K11 80 Lathe Chuck with Chuck Wr

|||

Product description

Specification:



Condition: 100% Brand New
Item Type: Lathe Chuck
Model Specification: K11 80
Chuck Type: Three-jaw chuck
Chuck Structure: Large hole chuck
Power Type: Manual
Chuck Diameter: Approx. 80mm / 3.15in

Chuck Aperture: Approx.16mm / 0.63in

Clamping Size Range: Approx. 2 ~ 22mm / 0.1 ~ 0.9in

Supporting Size Range: Approx. 25 - 70mm / 1 - 2.8in

Centering Accuracy: 0.07 (mm)
Applicable Machine Tool: Lathe
Material: Plate body cast iron, steel for jaw
Limit RPM: 4800r/min
Maximum Input torsion: 40N.m

Note:
When the chuck rotating bevel gear rotates the coil wire, it will be tighter, and the tight rotation is not a quality problem.
The jaws can be moved back and forth after installation, which is not a quality problem




Package List:

1 x Lathe Chuck3 x Jaw 1 x Chuck Wrench 3 x Set of Screw 


Note:

1. Cleaning the grease in the screw hole of the chuck before installation2. Regular cleaning and lubrication should be performed during use to maintain the accuracy of the chuck and prolong its service life3. After the chuck is clamped, do not hit the workpiece with a hammer to prevent the accuracy of the chuck from being affected and the parts from being damaged.

3-Jaw Self-Centering Chuck Set, K11 80 Lathe Chuck with Chuck Wr

skip content

MON WEBTOONS


New to WEBTOON